Designed primarily for multi-zone commercial installations, MTX Series matrix processors are equipped with flexible processing functions that are essential to a wide variety of applications such as retail stores, restaurant/bars or banquet rooms. Responsible for the primary processing functions at the heart of your system’s design, MTX processors allow you to configure, program, and manage your entire sound solution via the intuitive interface of the accompanying MTX Editor software application. The series is comprised of two models with varying DSP capacities and expansion capabilities, allowing MTX processors to meet the demands of a truly impressive range of commercial environments.
Tehničke specifikacije
MTX3 | |||
---|---|---|---|
Mixing capability | Mixing channels | Mixing Channel : 8 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix/ Output Busses : 8 Mono | |
Input channel functions | Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (only available in ch 1-4)/ Stereo CH: 3-band PEQ, Comp, Auto Gain Control | ||
Output channel functions | Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter | ||
I/O | Phantom power | +48V | |
Internal processing | Priority Ducking, Ambient Noise Compensator | ||
Sampling frequency rate | Internal | 48kHz/44.1kHz | |
Signal delay | Less than 2.5ms (AD-DA @48kHz) | ||
Total harmonic distortion | Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB) | ||
Frequency response | 20Hz to 20kHz, +0.5dB, -1.5dB | ||
Dynamic range | 107dB (Gain:-6dB) | ||
Hum & noise level | Equivalent input noise | -60dBu (Gain:+66dB), -83dBu (Gain:-6dB) | |
Crosstalk | -100dB | ||
Heat dissipation | 43kcal/h max | ||
Power requirements | AC100V-240V 50Hz/60Hz | ||
Power consumption | 50W | ||
Dimensions | W | 480mm (18.9") | |
H | 44mm (1.7") | ||
D | 362mm (14.3") | ||
Net weight | 4.8kg (10.6lbs) | ||
Others | Memory bank : PRESET 50 |